 |
|||
|
|||||
TW-24L High Speed Vertical Machining Centers
TW-24L SPECIFICATION
|
MODEL |
TW-24L |
| Travel | |
| X axis (Longitudinal) | 610 ( 24" ) |
| Y axis (Cross) | 460 ( 18" ) |
| Z axis (Vertical) | 460 ( 18" ) |
| Spindle nose to table surface | 100-560 ( 4" - 20" ) |
| Spindle center to column surface | 500 ( 20" ) |
| Table | |
| Table dimension | 710 x 460 (28" x 18") |
| T-slots (pitch x no. x wide) | 14 / 16 (opt) x 4 x 100 (39.3") |
| Table height from the floor | 820 ( 32" ) |
| Table load capacity | 300 kgs (660 lbs) |
| Headstock | |
| Spindle nose | #40 Taper |
| Spindle RPM | 10,000(Standard)/12,000/15,000(opt.) |
| Feedrates | |
| Rapid traverse for X, Y, Z axis | 36 x 36 x 32 m / min. ( 1420 x 1420 x 1280 ipm) |
| Cutting feed for X, Y, Z axis | 1 - 10 m / min. ( 0.04 - 393 ipm) |
| Motors | |
| Main motor (cont./30min) | 5.5 kW / 7.5 kW |
| AC servo motor for each axis | 1.5 kW x 1.5 kW x 4.0 kW |
| Coolant system | 580 W |
| Lubrication system | 25 W |
| Chiller system | 850W for spindles 8,000 RPM and above |
| Automatic tool changer | |
| Magazine for armless type | 16 / 20 Tools |
| Magazine for arm type | 24 Tools |
| Max. tool diameter | 76 mm ( 3.5" ) |
| Max. toollength | 150 mm ( 6" ) |
| Max. tool weight | 5.5 kgs (12.1 lbs) |
| Accuracy | |
| Positioning | ±0.0050 mm / ±0.0002" |
| Repeatability | ±0.0025 mm / ±0.0001" |
| General | |
| Air pressure | 5Kg / cm² over |
| Machine weight | 3,150 kgs ( 6,950 lbs) |
| Floor space (L x W x H) | 1800 x 2800 x 2700 (126" x 110" x 106" ) |
| CNC controller | Fanuc 0i/ 31i, Meldas M70V, Heidenhiem |
All specifications and designs are subject to change without notice.
|
Standard accessories |
|
Optional accessories |
|
Full enclosure guard |
Automatic power off (M30) |
10,000 / 12,000rpm spindle with chiller |
|
Turning operation panel |
Automatic lubrication system |
Coolant thru spindle preparation |
|
Rigid tapping |
Spindle air purge system |
Chip flushing system with high |
|
MPG (hand wheel) |
Spindle air blow system | pressure pump |
|
Halogen work light |
Coolant system with coolant tank |
Chain type chip conveyor with bucket |
|
Leveling bolts and blocks |
Heat exchanger of electrical cabinet |
4th axis interface |
|
Beacon light |
Tool box for machine set up |
Transformer |